2026 Price Guide
How much does a fence cost in Porter Ranch?
Straight numbers by the linear foot, not a lowball teaser. Here is what a fence actually costs in Porter Ranch, by material, and what moves the price up or down on these foothill lots.
Cost by fence type
| Fence type | Installed / linear ft | Typical 100 ft | Typical 150 ft |
|---|---|---|---|
| Chain link | $18 - $40 | $1,800 - $4,000 | $2,700 - $6,000 |
| Wood privacy | $30 - $60 | $3,000 - $6,000 | $4,500 - $9,000 |
| Vinyl / PVC | $40 - $70 | $4,000 - $7,000 | $6,000 - $10,500 |
| Wrought iron | $50 - $120 | $5,000 - $12,000 | $7,500 - $18,000 |
Every range covers posts set in concrete, panels or pickets, gates and hardware in the run, and installation labor. Your written quote is exact to your property line, your material, and your slope.
A range is not a price. Your run, your grade, and your tract guidelines decide the figure.
Request a free estimateGates, pool fencing, and add-ons
| Item | Typical installed |
|---|---|
| Walk gate | $350 to $1,200 each |
| Driveway gate (manual) | $2,000 to $8,000 and up |
| Automatic gate operator | add $1,500 to $5,000 |
| Pool safety fence (removable mesh) | $15 to $30 / linear ft |
| Pool safety fence (permanent metal) | $40 to $90 / linear ft |
| Old fence demo and haul-off | $3 to $10 / linear ft |
Gates carry the widest spread of anything here. A long sloped drive off Porter Ranch Dr prices differently from a single walk gate, so we quote yours as its own line.
Request a free estimateWhat drives the price up or down in Porter Ranch
- Flat tract versus hillside pad. Flat lots south of Rinaldi set posts quickly. The engineered cut-and-fill pads north of the 118 step down a slope, so posts need deeper footings and panels are racked or stepped to follow the grade, which adds labor and concrete.
- Wind-rated setting. Santa Ana gusts pour off Oat Mountain and have topped fifty miles an hour, so posts and gates are set for wind load. A solid six foot fence is a sail, and the footing is what keeps it standing.
- Fire-zone material. On the foothill lots in the Very High Fire Hazard Severity Zone, tubular steel, iron, or block near the house costs more than wood but supports defensible space.
- HOA-approved material. The master-planned tracts sometimes require a specific style or color, which can steer you toward a particular line and add review time.
- Removing an old fence. Demolition and haul-off are a real line item, and we show it plainly rather than hiding it in a per-foot rate.
- Gates and access control. A driveway gate with an automatic operator is the single biggest add on many Porter Ranch estates.
Wood versus vinyl in Porter Ranch
Wood is cheaper up front, roughly $30 to $60 per linear foot against $40 to $70 for vinyl, and cedar or redwood gives you the warm, natural look most of the tract backyards were built around. The trade-off is upkeep. Wood wants a stain or seal every few years to hold up to the hot foothill sun, and pickets can cup or check over time. Vinyl costs more at install and never needs paint, holds its white through the heat, and shrugs off the dry seasons, which is why many homeowners north of the 118 choose it for a long privacy run they do not want to maintain. On a fire-zone lot near the open space, neither is the right choice close to the house, where iron or block belongs.
Want your exact number?
We walk the property line in Porter Ranch, measure the run, read the slope and the wind, and leave you with a fixed written quote. Free, and no card to book the visit.
Request a free estimateEverything here sits inside our wider work on fence installers in Porter Ranch.
Cost questions
How much does a fence cost per linear foot in Porter Ranch?
Installed fencing runs about $18 to $40 per linear foot for chain link, $30 to $60 for wood, $40 to $70 for vinyl, and $50 to $120 for wrought iron. Chain link and short back-yard runs sit at the low end, ornamental iron and hillside footings at the high end.
How much does 150 feet of wood fence cost in Porter Ranch?
A 150 linear foot run of six foot wood privacy fence generally runs $4,500 to $9,000 installed, covering posts, panels, hardware, and labor. Removing an old fence, setting deeper footings on a graded hillside pad, or a premium cap and trim move it toward the upper end.
Why does a Porter Ranch hillside lot cost more to fence?
The engineered cut-and-fill pads north of the 118 step down a slope, so posts need deeper footings and panels have to be racked or stepped to follow the grade. That extra labor and concrete, plus wind-rated setting for the Santa Ana gusts off Oat Mountain, add to the per foot figure compared with a flat lot south of Rinaldi.
Does the Porter Ranch HOA affect the price?
Not the price of the fence itself, but it affects the timeline and sometimes the material. The master-planned tracts review fence style, color, and height before work, and some require a specific look, so we build the submittal into the schedule and quote the material the association will actually approve.
Does the height rule change what a fence costs here?
It can, and it is worth settling before you order material. Most of Porter Ranch sits inside a designated Hillside Area, where the City holds a side or rear fence to six feet. On a flatter lot forty feet or wider outside that boundary the code allows eight, and that extra height buys more material, taller posts and deeper footings on the same run. Going above your lot's allowance also moves you into permit territory through LADBS, which costs time more than money. The tract HOA review comes first either way, and that is the step that actually moves your schedule.